Security Hardware Shop

Shop genuine Mercury and Axis access control hardware at direct-to-consumer prices. Free standard shipping, 1-year guarantee, and no integrator markup on every order.

2N

2N IP Force 1-Button IP Intercom Station, IP69K/IK10 Vandal-Resistant, PoE, No Camera (01336-001)

$879.99

In Stock — Only 4 left

The 2N IP Force (01336-001) is a single-button IP intercom station engineered for the most demanding outdoor and high-traffic entrances. Built into an aluminum housing rated IP69K for water and dust ingress and IK10 for vandal resistance, it withstands extreme weather, jet-washing, and physical attack while delivering crystal-clear two-way SIP communication. Two built-in microphones and an integrated 10 W loudspeaker (94 dB SPL at 1 m) cut through ambient noise at gates, parking entries, prisons, industrial sites, and transit facilities. Connects over a single Cat5/6 cable using 10/100 Base-T Ethernet with PoE — no separate power run required. Fully SIP-compliant and server-free, the IP Force integrates with existing VoIP phone systems, CCTV, and access control platforms. Optional tamper switch detects unauthorized opening. This is the 1-button audio-only model; the camera-equipped variant is 01337-001. Key features: 1 backlit call button | Aluminum vandal-resistant housing (IK10) | IP69K weatherproof rating | 10 W loudspeaker, 94 dB @ 1 m | Dual microphones | PoE-powered (IEEE 802.3af) | 10/100 Base-T Ethernet | SIP standard, server-free | Optional tamper switch | Indoor / outdoor use | MPN: 01336-001

Mercury

Acre RS2 LP1502 Intelligent Controller (Refurbished)

$899.99

In Stock — Only 1 left

The Acre / RS2 LP1502 is a 2-door intelligent controller built on the HID Mercury LP platform, the processing core of an RS2 AccessIT or Acre access control system. It handles access decisions, alarm monitoring, and scheduled operations on board, so doors keep working even if the connection to the host server drops. Because Acre Security acquired RS2 Technologies, this same LP1502 board is fully supported across both RS2 and Acre deployments — making it the correct controller whether you're expanding an existing RS2 system or maintaining one under Acre. Out of the box it natively supports up to 4 readers and 2 doors, expandable across the Mercury bus with downstream interface panels. Eight supervised inputs monitor door contacts, request-to-exit buttons, and alarm points; four Form-C relay outputs drive strikes or signaling. On-board Ethernet connects it to the host, and it accepts TTL, OSDP/RS-485, and F/2F reader signaling. Each unit is professionally refurbished, tested, and backed by our 1-year hardware guarantee.

Mercury

Alarm.com ADC-AC-MR52 Two-Reader Expansion Module (Series 3)

$299.99

In Stock — Only 1 left

The Alarm.com ADC-AC-MR52 is a two-reader expansion module that extends your Alarm.com Mercury-based access control system with additional door coverage. Each MR52 adds two card reader ports, eight general-purpose programmable input monitor points, and six Form C control relays to any Alarm.com Mercury EP series intelligent controller. Designed as a direct replacement for the legacy ADC-ACX2, the MR52 provides enhanced Series 3 security with AES-128/256 encrypted communication over the RS-485 bus and an embedded cryptographic memory chip. Reader ports support Wiegand, F/2F, and OSDP Secure Channel protocols, giving you flexibility with both legacy and modern card readers. Input circuits can be individually configured for normally-open or normally-closed operation, with optional end-of-line resistor supervision. The six relay outputs are individually programmable for fail-safe or fail-secure operation, making this module ideal for expanding door control, elevator access, and auxiliary device monitoring across your Alarm.com security installation.

Axis Communications

AXIS A1001 Network Door Controller (0540-001)

$599.99

In Stock — Only 1 left

The AXIS A1001 Network Door Controller (0540-001) is a non-proprietary, IP-based door controller designed to give integrators and end users the flexibility of an open platform without the cost of a traditional head-end. Each unit is a fully self-contained controller — connect it to your network with a single PoE cable and manage one door directly from the built-in web interface, or scale up to 33 networked controllers using the included AXIS Entry Manager software. For larger or more advanced deployments, the open API lets you integrate the A1001 with leading third-party access control, video surveillance, intrusion, and time-and-attendance platforms. Built on a Linux-based architecture with PoE (IEEE 802.3af Class 3), UPS support, and 14 configurable I/Os plus 5 power outputs, the A1001 supports most Wiegand and RS-485 OSDP readers. Plenum-rated for indoor wall or ceiling mounting.

Axis Communications

Axis A1210G-B Network Door Controller (Powered by Genetec)

$449.00

In Stock — Only 1 left

Compact single-door network controller pre-loaded with Genetec Synergis access control firmware. Supports up to 2 OSDP readers or 1 Wiegand reader with 250K credential and 150K event local storage. PoE powered with plenum-rated casing, built-in cybersecurity via Axis Edge Vault, and offline operation capability. Ideal for Genetec Security Center on-premise, cloud, or hybrid deployments.

Axis Communications

AXIS P3287-LV 5MP Indoor Dome Camera (02983-001)

$809.99

In Stock

The AXIS P3287-LV is a 5 MP indoor dome camera that pairs forensic-grade video with built-in AI. Forensic WDR and Lightfinder 2.0 deliver sharp, color-accurate footage in challenging light, while optimized IR provides night vision up to 40 m (130 ft) in complete darkness. Preinstalled AXIS Object Analytics classifies and counts humans and vehicles, and onboard audio analytics detect sound events like screams or breaking glass and trigger alerts automatically. A varifocal 3.0–8.5 mm P-Iris lens with remote zoom and focus makes installation and adjustment fast — no ladder trips after mounting. The vandal-resistant IK10 polycarbonate housing stands up to tampering, and single-cable PoE keeps installation simple. Zipstream with AV1/H.265/H.264 cuts bandwidth and storage costs without sacrificing detail at 5 MP / 30 fps. Edge storage via microSD, TLS 1.3 encryption, and TAA compliance make it ready for enterprise and government deployments. Backed by Axis 5-year warranty.

Axis Communications

AXIS T91B50 Telescopic Ceiling Mount (5507-451)

$97.99

In Stock

The AXIS T91B50 is a telescopic ceiling mount that drops a camera below ceiling-level obstructions — lighting, ductwork, and ventilation pipes — for an unobstructed view. The telescopic pipe adjusts from 1 m (39 in) to 2 m (79 in) straight out of the box, with optional 30 cm and 100 cm extension pipes available for longer drops. A swivel action with ±45° pivot lets the mount swing safely out of the way if struck by a tall vehicle or forklift, and keeps the camera perpendicular even on a sloped ceiling. Built for demanding indoor, outdoor, and offshore environments, the T91B50 is rated IK10 for vandal resistance and NEMA 4X for corrosion and salt-spray protection. Cabling routes inside the pipe for a clean, secure install, and the mount can be wire-secured to the ceiling for extra-sturdy applications. The 1.5" NPS thread is compatible with all Axis PTZ dome cameras, outdoor fixed domes, and Axis pendant kits.

HES

HES 1006CLB-F-12/24D-630-LBM Electric Strike with Latchbolt Monitor, Fail Safe, Includes Faceplates (J, K, KD, KM), Satin Stainless Steel

$379.99

In Stock — Only 3 left

The HES 1006CLB is a complete electric strike engineered for virtually every latchbolt lock, accommodating cylindrical and mortise locksets for ANSI 4-7/8" strike plates with up to a 3/4" latchbolt. This LBM version adds a built-in latchbolt monitor, providing a real-time signal of latchbolt position for door status monitoring and integration with your access control or alarm system. Its dual interlocking plunger design and heavy-duty stainless steel construction let the 1006 series exceed every major electric strike standard: 2,500 lbs of static holding strength, 350 ft-lbs of dynamic strength, and factory-tested endurance beyond 1,000,000 cycles. The fail-safe configuration releases the door on power loss for life-safety and egress applications, while dual-voltage 12/24 VDC continuous-duty operation and a non-handed design simplify installation on any opening. The box ships complete with the 1006 strike body, J, K, KD, and KM faceplates in a 630 satin stainless steel finish, plus all mounting hardware. Backed by our 1-year hardware guarantee.

HES

HES 9400-BSP Surface Mounted Electric Strike for Rim Exit Devices

$329.99

In Stock — Only 3 left

The HES 9400-BSP is a black suede powder coat, surface-mounted electric strike built for rim exit devices on commercial access-control openings. It mounts to the door frame in front of the strike location, so most retrofits do not require cutting into the frame — useful when adding card-reader-controlled entry to an existing panic-bar or rim-exit installation. The 9400 series supports 12 or 24 VDC operation and is field-selectable for fail-safe or fail-secure operation. Its non-handed design works on left- or right-hand openings, and horizontal adjustment helps installers dial in the door-to-frame gap without re-drilling. Ships from the RSH warehouse the same business day on orders placed before 4 PM CT and is covered by our 1-year guarantee in addition to HES's manufacturer warranty. If you are not sure whether the 9400 series or a deeper-recess strike is right for your exit device, email a photo of the latch and frame to [email protected] and we will help you choose.

Inovonics

Inovonics EN1262 EchoStream Wireless PIR Motion Detector with Pet Immunity — 902–928 MHz, 40 ft Range

$49.99

In Stock

The Inovonics EN1262 EchoStream Wireless PIR Motion Detector with Pet Immunity is engineered for residential and low-traffic commercial spaces where pets and small animals would otherwise cause nuisance alarms. Operating on the FCC Part 15 902–928 MHz frequency band with redundant multi-channel transmission, the EN1262 delivers reliable catch performance and unsurpassed false-alarm immunity at distances up to 40 ft (12 m). Advanced signal processing distinguishes legitimate human intrusion from animals under 40 lbs, letting protected areas stay armed continuously without disabling zones for pets. An onboard case tamper switch (with optional wall tamper) reports physical interference back to the panel. Built for Inovonics EchoStream-compatible receivers and any Bosch, DMP, Honeywell, or Napco system that integrates the EchoStream platform. Key features: Passive infrared (PIR) motion detection | Pet immunity up to 40 lbs | 40 ft (12 m) coverage range | 902–928 MHz EchoStream frequency band | Multi-channel redundant transmission | Case tamper switch (optional wall tamper) | Designed for under 100 activations/day | Wireless — no wiring required | Indoor mounting | EchoStream-compatible receivers and panels | MPN: EN1262

Mercury

Mercury MR16OUT-S3 16-Output Multi-Device Interface Panel (Series 3) — RS2 Technologies Compatible

$349.99

In Stock

The Mercury MR16OUT-S3 16-Output Multi-Device Interface Panel (Series 3) — RS2 Technologies Compatible — adds 16 Form-C relay outputs to any RS2 Access It! or Mercury-based access control system. Engineered for integrators who need additional output control for door strikes, elevator floor enablement, alarm shunts, HVAC interlocks, or any auxiliary load switching, the MR16OUT-S3 communicates over a single 2-wire RS-485 multi-drop bus up to 4,000 ft (1,200 m) and supports speeds from 9,600 to 115,200 bps. Two onboard digital inputs monitor tamper and power-fault status. An embedded cryptographic memory chip stores communication encryption keys at rest, protecting the panel against credential extraction. Powered by 12–24 VDC at 1,100 mA max. Plenum-rated for indoor mounting. The output-panel companion to the Mercury MR16IN-S3 input panel. Key features: 16 Form-C relay outputs | 2 digital inputs (tamper + power fault) | RS-485 (2-wire, multi-drop, up to 4,000 ft) | 9.6 / 19.2 / 38.4 / 115.2 kbps | 12–24 VDC, 1100 mA max | Embedded encryption chip | Mercury Series 3 platform | RS2 Access It! and OEM controller compatible | Plenum rated | Weight 14 oz (400 g) | MPN: MR16OUT-S3

Mercury

Mercury Security MR16IN-S3 16-Input Monitor Interface Module, Series 3 (Genetec SY-MR16IN-S3)

$249.99

In Stock

The Genetec SY-MR16IN-S3 (Mercury Security MR16IN-S3) is a high-capacity 16-input monitor module that extends your Genetec Security Center deployment wherever you need to supervise alarm points. Natively supported by Synergis, it connects downstream of your Mercury intelligent controller over a 2-wire RS-485 bus, letting you monitor door contacts, motion detectors, glass-break sensors, panic buttons, and tamper circuits — without running home-run wiring back to the panel. Each of the 16 input circuits is individually configurable as normally open or normally closed, supervised or non-supervised, so a single board adapts to mixed sensor types. Two onboard Form-C relay outputs are programmable for fail-safe or fail-secure operation. As a Series 3 (S3) board, it features Mercury's updated processor with enhanced cybersecurity, making it the current-generation choice for new Synergis installs and the drop-in upgrade path for aging MR16IN Series 2 hardware.

Mercury

Mercury MR16IN-S3 16-Input Multi-Device Interface Panel (Series 3) — RS2 Technologies Compatible

$399.99

Out of Stock

The Mercury MR16IN-S3 is a Series 3 16-input multi-device interface panel (SIO board) designed for large-scale access control and alarm monitoring deployments. With AES-128/256 encryption and RS-485 connectivity, this input expansion module integrates seamlessly with RS2 Technologies. The MR-16IN-S3 delivers 16 fully supervised programmable inputs and 2 relay outputs, making it ideal for door contacts, alarm points, auxiliary sensors, and perimeter monitoring zones.

Mercury

Genetec Mercury MP1502 2-Door Intelligent Controller

$1099.99

In Stock — Only 1 left

Mercury MP1502 Cyber-Secure Intelligent Controller. This next-generation 2-door controller features enhanced cybersecurity with ARM TrustZone, secure boot, TLS 1.3, and FIPS 140-3 compliant encryption. Supports 2-4 card readers for two doors, expandable to 64 doors via RS-485 downstream panels. Linux-based with 240,000 cardholder capacity.

Mercury

Avigilon Mercury MP1502 2-Door Intelligent Controller

$1099.99

In Stock — Only 1 left

Mercury MP1502 Cyber-Secure Intelligent Controller. This next-generation 2-door controller features enhanced cybersecurity with ARM TrustZone, secure boot, TLS 1.3, and FIPS 140-3 compliant encryption. Supports 2-4 card readers for two doors, expandable to 64 doors via RS-485 downstream panels. Linux-based with 240,000 cardholder capacity.

Axis Communications

Axis A1210-G Network Door Controller (Powered by Genetec)

$499.00

In Stock

Compact single-door network controller pre-loaded with Genetec Synergis access control firmware. Supports up to 2 OSDP readers or 1 Wiegand reader with 250K credential and 150K event local storage. PoE powered with plenum-rated casing, built-in cybersecurity via Axis Edge Vault, and offline operation capability. Ideal for Genetec Security Center on-premise, cloud, or hybrid deployments.

LenelS2

Lenel LNL-1300-S3 Single Reader Interface Module

$179.99

In Stock — Only 5 left

Lenel LNL-1300-S3 Series 3 Single Reader Interface Module. This downstream module connects one access control reader to your Lenel ISC controller, supporting Wiegand, Clock & Data, Supervised/Unsupervised F2F, and OSDP RS-485 readers with Secure Channel encryption and biometric template transfer. Supports up to 16 card formats. Up to 32 SRI modules can be multidropped via RS-485 up to 4,000 ft from the ISC.

Genetec

Genetec Cloudlink G2

$949.99

In Stock — Only 4 left

The Genetec Cloudlink G2 is a network-based access control appliance from Genetec Inc. designed to run Synergis Softwire on-premises. It serves as a central processing unit for Genetec Synergis access control deployments, managing Mercury-based door controllers and reader interfaces across a facility. The Cloudlink G2 connects to your local IP network and communicates with Mercury EP and MP series panels, consolidating door control, event logging, and cardholder management through Genetec Security Center. It is suited for mid-to-large deployments where edge processing is preferred over a dedicated server. The appliance supports standard PoE or external DC power depending on installation configuration and is rack-mountable for data center or IDF closet deployments.

Axis Communications

Refurbished Axis A1610 Network Door Controller

$449.99

Out of Stock

The Axis A1610 Network Door Controller is a 2-door, PoE-powered access control panel from Axis Communications. This refurbished unit has been inspected, tested, and verified to meet factory specifications before shipment. It supports up to 4 readers (2 per door), OSDP v2 for secure reader communication, and stores up to 250,000 credentials at the edge. Powered via PoE Class 4 or DC input (10–28V), the A1610 eliminates the need for a separate power supply, simplifying installation. Designed for use with Axis Camera Station Pro. For other platform compatibility, verify with Axis Communications before purchase. Each refurbished unit is backed by our 1-year hardware guarantee and ships with free standard shipping. Ready to deploy.

Axis Communications

Axis A1610-G Network Door Controller (Powered by Genetec)

$899.00

In Stock

Advanced two-door edge-based network controller pre-loaded with Genetec Synergis access control firmware. Controls 2 doors from a single PoE+ cable with 4 reader connections, 250K credentials, and 250K event local storage. Plenum-rated DIN-rail mountable casing, Axis Edge Vault cybersecurity (CC EAL6+), and full offline access logic at the edge. Ideal for Genetec Security Center on-premise, cloud, or hybrid deployments.

✓ Free standard shipping  ✓ 1-year hardware guarantee  ✓ Ships same day (by 4:00 PM CT)  ✓ 30-day returns

Shop Now